Hello all and welcome back! In this segment, we get to work in the transmission and final drive reassembly. We cover installation of the reverse idler gear as well as the countershaft & bearings. We also go through a number of seals in the transmission, and I make sure to include the numbers (also listed below). Be sure to visit the GoFundMe link below to contribute to the cause that this project is helping to bring awareness to. Thanks for watching and wrenching with me, and stay tuned!
Below is a compiled parts list for the transmission seals, gaskets, and bearings:
REAR END SEALS:
PTO Seal – 59401D/358790R91/71910C1 – SKF 473010 or 16246
PTO Sealing Ring – 58419D
PTO Lever Seal – Factory # 70268D/358796R91/488560R91/358831R91 – SKF 6925
Trans Input Shaft Seal – 79634H/383159R91 – SKF 18733
Countershaft Seal – 43308D/71701C1/356502R91 – SKF 13602
Hydraulic Drive Seal – 43509D/938294R91SKF 13649
Rear Axle Seal (2) – 43722D/SKF 25043/National 455001S
Belt Pulley Seal – 49177D / 358783R91 / 358822R91 / SKF 18580 / 389407R92 / National 472439
Brake Pedal Shaft Seal (2) –380959R91 – 476838 National
Differential Brake Seals (2) – 48498D / 358777R91 / 360252R91 / 76510C91 – National 416444
Rear Axle Felt Seal (2) – 43720D
Belt Pulley Felt Seal – 49133D
Pinion Cage Seals (2) – 4222D
GASKETS:
Axle Seal Cap Gasket (2): 1342399C1
Top Cover Gasket: 48686D
PTO Assembly Gasket: 1342394C1
Countershaft Seal Carrier Gasket: 1342395C1
Input Shaft Seal Carrier Gasket: 47896D
Input Shaft Bearing Carrier Gasket: 1342396C1
Axle Housing Gasket (2): 49789D
Belt Pulley Drive Shaft Cover Gasket: 54538D (no avail)
Belt Pulley housing to top cover Gasket: 49619DA/1342401C1
Belt Pulley Drive Shaft Bushing: 49143D (Discontinued)
Transmission Bearings:
Axle bearings:
Inner – ST227B (New Departure 1212AG)
Outer – ST328A
Mainshaft Bearings:
Rear: ST293 (Also lists a 309)
Pilot – 43356DA or Hyatt U1205
Input Shaft Bearings:
Inner Bearing – ST206
Outer Bearing – ST247 (also states will work for ST248-A. Lists a superceeding number of 40031 as a replacement for # ST247/ST248-A)
Countershaft (lower shaft) Bearings:
Rear – ST202 (Also lists 209BB)
Front – ST246 (Also lists 206L)
Pinion Shaft Bearings:
ST201 (also lists PB38)
Differential Carrier Bearings:
ST227B (Also lists 1212AG New Departure – same as inner axle bearings)
Likes: 125
Views: 1847
When I did my first transmission I went to Mr. Steiners for parts and little did I know I’d be removing them myself so I didn’t have but a very limited selection of tools and I spent a weekend up there. He was a big help though. That was in 94.
Thanks for taking the time to list all the seals and gasket numbers in your video & description 👍
My dad is currently doing Farmall H. We saved it from the scrap pile on a cattle farm.
Another nice vintage tractor teaching video. You are going to have quite video library for current and future vintage tractor enthusiasts. Good to see everything starting to come back together. 🇺🇸🚜👍
Kenny I've been trying to e-mail you about the H project but it keeps kicking it back to me saying it's "undeliverable". Are you having email problems lately? I also left this message under your last video as well.
Come on Kenny, you know as well as I do that you’ve got it apart, you’ve got a tap and die set, chase every empty bolt hole it’s got, Squatch will tell ya the same.
Finally, the start of assembly of the Farmal "H". So far, so good…..