This video covers:
▶ How to remove front upper control arm
▶ How to remove ball joint boot clip
▶ How to press out upper ball joint
▶ How to line up the upper ball joint
▶ How to press in upper ball joint
▶ How to grease upper ball joint

During my bushing install, I realized my ball joints needed to be replaced so I ordered new ball joints. I finally received the ball joints and I’ll take you guys through the steps of replacing the upper ball joint in this video. I go through the steps of how to remove the upper control arm, press out the old ball joint and press in the new ball joint. I do all this with a ball joint press kit that I borrowed from Canadian Tire.

Any questions or suggestions? Comment, Like, Subscribe and share your idea with me!

▶ Follow me on Instagram!:

Song: Ikson – Paradise
Music by

#BallJoints #DIYCarRepair #Rebuild #UpperBallJoints #EFCIVIC #CarMods #HondaCivic #VintageCIVIC #Civic #D16Y8 #CivicSi #VintageCar #CarRepair #rebuild #cars #carmods #hondatech #honda #edcivic #engineerbuild #budgetbuild #projectcar #diyproject #diymechanic #diycarproject #carrestoration #restoration #1990civic #hondalover #front #uppercontrolarms #suspension #OEMTOOLS #balljointpress #canadiantire

Likes: 6

Views: 21

Leave a Reply

  1. oldskool

    Cool. Most people just replace the arm.

Comments are closed.