I’ve tried to get my boss to buy me a pair of them clamps but he never did. 🙁 I used a pair of quick clamps and bolted terminals to them to clamp between parts.
mannysosa
Best pipe bender you can get!
Finn Suchara
No you see what you have to do is let the grinding dust build up on the floor, enough that the whole area becomes conductive. Then you don't even need no stinking cables. 🧠
Jonathan Stewart
I like the metal box method, no wire to trip on
ismaelcastillo43
Guilty of the metal bridge
Greg Pullman
I also added a second heavier ground off the welder
Joseph Latourette
Lol I've used a set of jumper cables for that
Randy Magnum
Just ground the welder to the building, and then you can just throw a ground from a column or rail in the floor to the job.
Slime recognize Slime
I’ve tried to get my boss to buy me a pair of them clamps but he never did. 🙁 I used a pair of quick clamps and bolted terminals to them to clamp between parts.
Best pipe bender you can get!
No you see what you have to do is let the grinding dust build up on the floor, enough that the whole area becomes conductive. Then you don't even need no stinking cables. 🧠
I like the metal box method, no wire to trip on
Guilty of the metal bridge
I also added a second heavier ground off the welder
Lol I've used a set of jumper cables for that
Just ground the welder to the building, and then you can just throw a ground from a column or rail in the floor to the job.
I just put two grounds on my welder.