[bsa_pro_ad_space id=14]
How to FILL stone chips and scratches in your car, fast and affordable! Filling Dents and Dings is easier than you may think! Looking at Stone chips and small scratches in your car or truck can really be frustrating especially if you don’t have the money to pay someone to repair them!
***********************************************
If you would like to help us out.
***********************************************
AFTER YOU DO THIS VIDEO THEN DO THIS ONE
___________________________________________________
USA Tools
Glazing Putty
2000 Grit Sand Paper
3000 Grit Sand Paper
Bondo Spreader
Razor Blades
Razor Blade Holder
Lac Thinner
Rubbing Alcohol
Micro-Fiber Towels
Hair Dryer
Spray Bottles
Dish Soap
*****Disclaimer*****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this YouTube channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.
[bsa_pro_ad_space id=15]
Likes: 1970
Views: 123106
Wow, you have some of the best videos on the Tube. Thanks for all your tips and help.
I cannot stress enough how amazing it is to see someone like you so confident in the fact that they can fix the problem. you remove all chances or doubts as to whether or not your videos are real , by creating the problem right in front of our eyes and then solving it. keep up with the good work your videos are amazing
hi, i have a few pin holes down to metal no rust, will glazing putty be enough to protect it? thanks in advance
Awesome! Any tips/tricks for when the chip is on the edge of a panel? I have a bunch on the front edge of my hood, where it meets the front bumper. They are directly on the edge, so the 'hole' is more than just one plane, if that makes sense?
if i used a paint pen once the chips are filled with the bondo do you think it would still turn out ok ?
Great video! Does this method work on plastic bumpers such as Porsche Boxters or 911s.
Heat gun to dry these faster?
Wish you could make a tutorial on how to fill the void in my soul…
Is it possible to use paint pen afterwards instead of spraying?
I cannot get enough of your videos, they're fantastic!