š Product link(s) at bottom of video description.
ā ļø Note: There have been a few comments about getting this professionally done. Unless you’ve practiced this on some sheet metal or a beat up car and have gotten good at it, I agree that you should seek a professional to do the repair work to prevent any further damage such as stretching the metal by pulling it out too far.
How I removed most of large dent left behind from someone hitting my car with their truck door. This method essentially uses a crossbar tool and hot glue gun to pull a dent up. It is a time consuming process, but it only costs around $15 to do. It works well on simple dents, but it may not completely fix deep dents or ones where the metal is creased such as in my case. There are before and after pictures at the end of the video.
š Crossbar Dent Repair Kit:
ā If you find this helpful, you can buy me a coffee at
Likes: 2451
Views: 575022
Seeing dents really gets to me. I have a few on my car and it drives me insane. I never park my car near anybody for that reason.
Thanks.
Thank you
A gimmick?
This guy talk to much.
Thanks for your video help I pulled a tiny bullet dent out last night used the same kit Iām left with a tiny crease now but much better. PS the bang was loud
THIS SEEMS TO ONLY WORK ON PANELS WITH A CLEAR COAT. I just tried it two motorcycle tanks that are sanded down. The glue wasn't strong enough to do anything. It would peel from the tank before actually doing any pulling.
thank you
As soon as he said, "…it pisses me off", I was in. Same scenario for me, thanks to some jerk at a home supply store. Looks like that kit did a pretty good job.
IT WORKS MAKES THE DENT OR CREASE almost unnoticeable , I did it for ten minutes and a 4 inch crease across is almost all gone i may hit it again tomorrow. The glue coming out of the gun goes all over like it did to me until I got use to the gun. They were going to charge me 600 to fix it glade I did it for 16 dollars I see some people had bad luck In guess I got lucky .