🛒 Product link(s) at bottom of video description.
⚠️ Note: There have been a few comments about getting this professionally done. Unless you’ve practiced this on some sheet metal or a beat up car and have gotten good at it, I agree that you should seek a professional to do the repair work to prevent any further damage such as stretching the metal by pulling it out too far.
How I removed most of large dent left behind from someone hitting my car with their truck door. This method essentially uses a crossbar tool and hot glue gun to pull a dent up. It is a time consuming process, but it only costs around $15 to do. It works well on simple dents, but it may not completely fix deep dents or ones where the metal is creased such as in my case. There are before and after pictures at the end of the video.
🛒 Crossbar Dent Repair Kit:
☕ If you find this helpful, you can buy me a coffee at
Likes: 2451
Views: 575022
The metal is already stretched once dented
This was very very helpful. Ty 🥰!
If you ever see car that did it aka still parked next to you, have a can of black spray paint and ruin there door
I have the same kit and I made sure to clean the car area and the plastic piece you apply the glue to with denatured alcohol, I also use it to clean off the residual glue stick from the car and it works great to remove a dent, but it does take several attemps to get the dent mostly or completely out. If you clean things well the pop as the glue releases is loud.
Why bother. Still not normal.
Cool HF tools do work after all
We wouldn't get this dent if all parking stalls everywhere are wider.new cars especially trucks are getting wider while most parking stalls are still narrow.
I have an ignorant question. Can we not fix the dent by taking the inner door panel off and pushing from the other side?
PDR pulls can take 3 to 4 hours to complete ..also tapping down the highs first before the actual pull helps alot and using a heat gun so you don't crack the paint
Thank you! Best wishes!