Presents a DIY method of lower fender rust hole repair with no welding. Don’t have a welder? Use Fiberglass cloth and Body Filler.
Likes: 3756
Views: 313112
Leave a Reply
Comments are closed.
Presents a DIY method of lower fender rust hole repair with no welding. Don’t have a welder? Use Fiberglass cloth and Body Filler.
Likes: 3756
Views: 313112
Comments are closed.
Do you have to be down to bare metal or could you put it over areas covered with por15?
Why does my cheese grader never grade that easy. I must wait to long.
Man can't get over how much filler you throw on lakeside. I see how it works for you.. I always try to go light and tight so theres less sanding.. many times end up with not enough filler another coat for low spots. Lol, will check out a cheese grater soon.. I may do fiberglass on a old sport trac I got to sell. It's the front lower edge of the fenders above the bumper about 2" up. So about 2"×6" holes.
So underneath that fiberglass the rust will start again as he didn't put any anti rusting agent. You NEED to coat the naked metal with an anti rusting agent BEFORE you put the fiberglass on it. Front and back need to be cleaned and coated.