In this episode of Garage Noise, Diy auto paint continues as we answer the question of how to spot paint a car with spray paint and clear and achive amazing results. No special tools in this episode no compressor not even a paint gun. I explain how you can repair your cars paint at home in your garage. The results are quite impressive! using Aerosol paint and spray max 2k clear coat Follow the step by step procedures to repair your paint.
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
In this video(affiliate links)
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
800 grit sanding sponge
spray max 2k clear
paint dabber
upol clear blender
automotive masking plastic
masking tape
foam tape
assorted scuff pads
assorted sndpapers
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
Follow us on Tik tok
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
how to prepare primer for paint
using body filler to repair a dent
How to repair body damage on your car
how to save a bad paint job
How to repair and paint your bumper
How to remove fisheyes from your paint job!
How to save a bad paint job
Song: Dipcrusher – Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: —————————————–
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video’s. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
Likes: 3611
Views: 216832
It ran because you came back up to the top on that third coat and went over the same area three times very close.
You went to heavy on your clear costs. And wear a mask, this stuff is very toxic. But thanks for the video.
Great job
Great job pal 👏🤩
Thanks for the video,I actually have a similar colour Honda Accord, but….I had a scratch on the corner rear bumper,I filled the scratch,sanded etc,applied 3 coats of base coat,then 3 of paint,then next day 3 clear coat. Waited 24 hours to lightly polish off but clear coat came off? Look horrible,I can see where it doesn’t blend in,I may have to do the entire bumper? Any suggestions please.have a great day
dude you gonna get a drip. light coats wait 10 minutes in between coats then compound and wet sand
Wow! I couldn't find a spec of dust in that paint!
Thanks for the great tips. I'm considering doing a modest repair and paint on my Nissan's front fender and your tips make it look feasible.
No primer?
What kind of filters did you use? After I used this clear coat product my throat was killing me. Thanks!