In this episode I’ll share the process of repairing a cars body lines after being damaged. I’ll share to process of pulling out the dent with a spot welder, shaping the metal before filler, mixing filling and blocking body filler. and how I recreate perfect body lines for amazing results!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
In this video
⬇️⬇️⬇️⬇️⬇️⬇️
vevor best auto 110v spot welder dent puller
80 grit hook and loop sand paper
320 hook and loop sand paper
round sanding block
dry guide coat
evercoat z grip filler
evercoat plastic honey
clean sheets mixing board
dura block kit
motor guard flex block
Roberlo me1 2k primer
prep solvent
Auto body line maker tool
mirka dustless sanding system
Icing glazing putty
3m Performance paint gun
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
SUPER THANKS button
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
Follow us on Tik tok
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
Rode wireless go
Dji osmo action
Acer Nito 5 laptop
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
g90 e tool demo
Autobody repair made easy
how to prepare primer for paint
using body filler to repair a dent
How to repair body damage on your car
how to save a bad paint job
How to repair and paint your bumper
How to remove fisheyes from your paint job!
How to save a bad paint job
Song: Dipcrusher – Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: —————————————–
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video’s. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
Likes: 345
Views: 9720
thanks for the video,but I never got a link for the clear base, used as a wet bed, a spot welder has an attachment to install that wire for pulling as well
As always, Chris getting it done!
Once again insight !
Or input.
When doing those pushed in door edges, I've been putting tape on the body hammer head and on the dolly. Works pretty well and doesn't damage the inner panel.
Great job and I love how you explain things thank you for the video Chris
You make it look easy, great job.
You knocked it out of the park, boss.
TYVM for the knowledge and inspiration 😎😎😎😎😎😎💯
Great job as always I never quit learning when watching your channel 👍
I dont think i would use it enough to justify buying one, but what a great tool for pulling dents. Thanks for sharing.
Are those new T-shirts available.? I think it’s got a 69 Camaro on them .