Learn how to repair and remove dents from your car. When you can’t do PDR, properly using a high quality body filler is the next best thing to remove dents. In this video, I show you how to sand the dents down to bare metal, add the body filler, add the glazing putty, spray paint the car at home, and then wet sand, compound, and polish, to make it come out amazing!
Pro Grade Body Filler:
Pro Grade Glazing Putty:
Spreaders:
Sanding Block:
Sandpaper assortment:
Tack Cloth:
Primer:
2K Clear Coat:
Full Face Respirator:
Respirator Filter:
Compound PC1:
Polish PC2:
Finishing Polish PC3:
Polishing Pads:
DA Polisher:
→ As an Amazon Associate I earn from qualifying purchases.
→ Become a ChrisFix Subscriber:
→ Instagram:
→ Facebook:
→ Website:
→ My Channel Home Page:
**If the video was helpful, remember to give it a “thumbs up” and consider subscribing.**
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
Likes: 8098
Views: 61912
Great explanation as to how and why you do the different steps. Thanks, Chris!
Looks like an airsoft war hahahahah love ya dude
From the thumbnail looks ooks like you got "AR-15ed"
and on the next ep we get: giant spoiler on the lemons bwm
Hello from Barcelona Spain mediterranean sea.
Fantastic video!!! the best the best!!! explanations , FANTASTIC CHANNEL congratulations. good look with the channel!
I checked out at 1:41 lol
Great review, but I am not handy at all.
lal…amateur… i sprayed my whole car without any tent or any masking tape…. in windy conditions xD its worth it… btw the full car got 3x400ml spray and 2layer and 1x400ml my arms are sprayed too thanks to the wind 😀 oh and a white tshirt goes to blue 😀 but.. still worth it 😀 its on the car since 2014 xDDD oh… and it has no clear coat on it 😀 XD
I was thinking ChrisFix fixing bullet holes on car door. But thumbnail looks like that
🙂
Something that could help My Mate Vince on his Rolls-Royce…and you also shown pretty much how to do a respray! Maybe you could have used one door with the DA polisher to show what's the actual difference you get with the tool. Wrap is nice…hope the car won't get banged up on the track though!