How to repair a bumper cover, How To: Fix a Dent in a Bumper Cover, How to fix a cracked bumper cover, How to repair a plastic bumper cover, Why kind of glazing putty to use on plastic, what type of filler to use on plastic, How to prep a plastic bumper cover for paint, How to sand and prepare a plastic bumper cover for paint.
SEM Bumper Bite:
HVLP Spray Gun used In Video:
Flexible Sanding Block:
400 Grit Sand Paper:
800 Grit Sand Paper:
1500 Grit Sand Paper:
Grease and Wax Remover:
How to Perform a Front Toe Alignment on Your Vehicle:
How to Diagnose Vibration Issues at Highway Speeds (55-75MPH):
How to Replace a CV Axle:
How to Replace Inner and Outer Tie Rod Ends:
How to Front Brake Pads and Rotors:
How to Replace Sway Bar Bushings and Endlinks:
How to Replace Brake Drums:
How to Test Inner and Outer Tie Rod Ends:
How to Replace an AC Compressor Clutch and Bearing:
How to Replace an AC Desiccant Element:
If this video helped you out please don’t forget to subscribe, give it a thumbs up or if you are feeling generous leaving a tip by clicking the ” i ” button on the corner of the screen. Thank you very much for your support!
Disclaimer:
Due to factors beyond the control of Ratchetsand Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchetsand Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video’s. Due to factors beyond the control of Ratchetsand Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchetsand Wrenches.
Likes: 5233
Views: 719396
Yes I got a 200 we 4 buick vreno I need to paint the bumber I did it but it did not came out good .how much do you cost me
Well that would take all day.. no wonder panel beaters charge an arm and a leg i guess.
When is when you apply the adhesive promor? Or what are the steps. Before the filler, primer or paint.
I just used spray a can and clear after it was sanded then finished. Using different grades of sand paper. 1000 to 5000 grit used then apply Meguires ultimate compound. Per chris fix instructions good video
overspray cringe
Is only for bumper or for any part of the car?
Nice job dude clear and easy to understand
If I want to sand.all bumper what sand paper you recommended me sr
Good job in explaining the process of fixing bumper cover scratches. What type of hardener did you use or would you recommend?
That guy has no idea what he's doing I'm an auto body technician by trade and he has not one sweet clue what he's doing in the video