In this video, 1A Auto shows you how to diagnose and repair a damaged defrost grid panel. This video applies to most vehicles with a defrost grid on the rear windshield.

🔧 List of tools used:
• Defrost Grid Repair Kit
• Test Light

For More Info visit us at

âš  DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Likes: 4126

Views: 636637

Leave a Reply

  1. Lisa Stephens

    My grid is fine but film is all blurred or melted? Help. Under warranty so need to take to dealer after talking to my insurance company…ug

  2. Misha Mondrian

    All killer, no filler! A must-watch for every Midwesterner, or anyone who lives above the 40th parallel.

  3. Zen Rapp

    This video was very helpful. Thanks for posting it. I followed the steps, found several break points and repaired them using the Loctite Repair Kit, but because the stencil included in the kit has a hole too wide, the result, although successful, looks awful. Now, I don’t know how to get rid of the mess.

  4. Gerardo Vargas

    nice, i will say u if it worked for me

  5. OldSchoolNoe

    Wow classic 1A Auto! Quality of the vid has greatly improved since then! (Especially the audio)

  6. Karzan Salah

    Nice content…just wanted to ask what was the repairin material you applied by the brush?

  7. itsonlymyopinion ok

    Whaat .. its this easy? .. lol .. I thought these wires were INSIDE the glass, imbedded ..

  8. Kris Gilkison

    I tint windows. Once I have fully allowed the compound to dry/cure, can I safely sand it down without causing another break in the line at that same spot?

  9. 000AM Rak

    Hello, I want to know the product name, product code, how to order the product from the website, or a short link to the product and order the product

Comments are closed.