Rebel Editor July 3, 2018 49 Comments



This whole job was done in one day. Using a spray booth we were able to bake the clearcoat on the final job and it was cured. The primer and paint can be done …

Likes: 1588

Views: 1095578

Leave a Reply

  1. theckolio

    what language was that? for some reason my closed caption says he was speaking english

  2. حسام حسام

    How to spray the car in detail step by step if you allow

  4. Agis Sawmy

    u r a fricking worst painter ever, feel sry for the audi owner, fucking retarded

  5. Arsalan Ahmed

    Poor Audi. This is totally unfair for a small ignorable scratch and fault.
    This guy did quick common lo standard easy less efforts job and destroyed the originality and quality of a beauty. So cheap.

  6. M M

    "ART OF CRAP" repair- RHS could get away with a filler but LHS is way too deep any std filler can take- they were designed to fill 2-3mm MAX!!! IF YOU ARE A FILLER CRAPPER you should be using fibre filler, then medium filler and fine finishing filler on the end. This shit job especially in this area- around the bumper, will crack or de-laminate over short period of time.
    This should be done with a dent puller or hammer and dolly job.

  8. Felix Azasu

    Whaaaaat a technician working without any proper appearance,noo personal protective wears….. naaaaa he ain't a professional @ all,please next time try nd put on Cotton gloves when applying putty,put on nose mask to prevent inhalation of toxic smell from the putty,clear goggles and an overall okaaaay!!!! And never and ever do putty sanding work in an spray booth,ideally spray booth must be free from dust and here is the case you are sanding putty in the spray booth .

  10. Fatonshabani Fatonshabani

    you are very amater, You work the same as one student in balkan sorry

Comments are closed.