[bsa_pro_ad_space id=14]
How to repair most any paint chip or scratch, and have professional results 🙂 Do not be overwhelmed with this process it is easier then you may think.
***********************************************
If you would like to help us out.
***********************************************
A MUST SEE FIRST
Prior Video to View:
______________________________________
USA TOOLS:
Self Etching Primer
Fiber Towels
Gloves
Dewalt Polisher
Dual Action Polisher
Clay Bar
8″ Foam Com Pad
Wool Com Pad
Wool Polishing Pad
Foam Sanding Boards
Polish
Cleaner Wax #2
Carnauba Cleaner Wax
Hookit 7″ Pad
Spray Bottles
Dish soap
1200 Grit
2000 Grit
3000 Grit
Wax Applicator
Glue
Lac Thinner
____________________________________
UK TOOLS:
Clay Bar
Fiber Towels
Gloves
Soap
Spray Bottles
Paint Polish
Polisher Kit
Foam Pads
Sand Paper Kit
Wool Com Pad
Wool Polishing Pad
Cleaner Wax
Wax Applicator
Cleaner Wax #2
Sanding Boards
Lacquer Thinner
_________________________________
DEUTSCHLAND TOOLS:
Paint Polish
Polisher
Clay Bar
Microfiber
Foam Pads
Wool Com Pad
Polishing Pad
Cleaner Wax #2
Cleaner Wax
Sanding Blocks
Gloves
Spray bottle
Sand Paper
Applicator
Thinner
*****Disclaimer*****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this YouTube channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.
[bsa_pro_ad_space id=15]
Likes: 4944
Views: 325927
You are the man!
I'm new to this, along with this is going to be my first time doing it on my car. So here's my question, since you buffed it so nice and shiny and it's a different look from the rest of the car. does that mean you'll have to buff your entire car to make it look the same? 19:56
NOTE: I have a newer 2017 Mazda and I have the paint chip with the rust from pebbles on the roof of my car does that mean I'll have to wet sand the entire roof, or just the rust chips?
Sweeeeeeeeet video. I have some spare base coat and separate clear coat from when the car was painted. Do I go through your process on base coat,then same process on clear coat…..or do I mix some base and clear together, then apply your process. If I mix, do I 50/50
Amazing video.
Awesome sir, LOL
Tried this process and think I need to redo my spots. Once I started wet sanding it appeared that the touch up paint still has rough outside edges from the previous paint. Should I touch up the spot again with touch up paint, and then try wet sanding again until the area is all flush? Have two marks on my hood, and one vertical on a door. I have wet sanded marks before, but am always cautious doing so on my wife's Subaru. I know their paint is very touchy since they are so Green in their process.
What do you do if you get holograms after buffing?
This is a great video. I'll be trying this next week.
SPC on the rust chips how long does the self etching primer needs to dry before painting?
I tried using a dual action polisher after wet sanding skipping the dewalt. Cause I didn’t have one. The dual action using a medium cut foam pad is ineffective it takes too long. After wet sanding The scratches were from wet sanding only. Any comments appreciated.