How to prepare your car for primer. diy auto body and how to primer a car
In this episode I will teach you how to prepare your car for primer.
how to evaluate the car for dents, what sandpaper should be used for the situation , what steps to take in order to gets the best possible results for you paint job.
Thanks for watching! If you have questions or comments leave them below !
To increase your knowledge and build your skill SUBSCRIBE to the channel and check out my other videos!!!
Disclaimer as an Amazon Associate I earn a small commission (at no additional cost to you) from qualified purchases. I will not recommend any product that I do not use personally.
My amazon affiliate store : Tools and materials are organized into categories .
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
CHEN REFINISH Premium Quality Black 2-3/4″ x 5″ Rubber Sanding Block
Dura-Block AF4405 Black Scruff Pad
3M 05777 Hookit 6″ x 1/2″ x 3/4″ Soft Interface Pad
3M 31435 Stikit Gold 6-inch P320A Grit Disc
3M 03020 Imperial Wetordry 3-2/3″ x 9″ P600 Grit Sandpaper
primer gun 2.0mm nozzle with regulator
Optex polyester primer color change
Optex primer catalyst fast
Speedkote 2k urethane primer kit fast dry
Speedkote epoxy primer quart kit
sem self etching primer
sem aerosol primer
Bondo Gray Filler Primer, Highly Durable & Easy to Use, 11 oz, 1 Aerosol
Kleanstrip Prep-All Wax & Grease Remover, Gallon (KLE-GSW362)
To increase your knowledge and build your skill check out my other how to videos and don’t forget to subscribe to the channel!
Be sure to check out my other videos in the links below!
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Things that will ruin your diy paint job
How to repair cracked paint on your car
How to repair fiberglass
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video’s. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
Likes: 2577
Views: 162920
Looks satisfying…. I’m just trying my first paint job. Ecoat parts, but hood had a ding on an edge, so I sanded to metal, put body filler, sanded with 80, the 150, and sprayed rattle primer on it…. 10min later, another light coat of prime…. Then tried to sand it and all went to shit.
Repeated the steps 3 times, learned that wet sanding didn’t gouge the primer and filler.
What gun nozzle size are u using for that primer?
Thank you..sir.
Hey brother, I'm thinking about painting my crown vic, you should know how shitty that for white paint is lol, do I need to sand between primer layers?
Great job. Thanks for posting. Very clear and to the point. This helped alot
Rebuilding a VW Bug from the ground up, wanting to paint it myself. Never attempted the painting before. Your video was very helpful. Definitely going to check out some more of your videos.
Nice work love the details and materials
So why no mask? Wouldn’t you be breathing in fiber glass