Rebel Editor April 6, 2023 40 Comments



The Clear coat was faded and flaking on my $350 Acura Legend, to the point that the paint would have to be sanded and re-painted in some areas.
Part 2 – Wet Sand and Polishing:

Products used:
Clay Bar:
Meguiars E-7200 sanding block:
3M Wetordry Sponge Pad #20:
masking paper 18″:
Masking Paper machine 18″:
800 grit sand paper: — if out of stock, try 3M 800 grit:
1000 grit sand paper:
1200 grit sand paper:
1500 grit sand paper:
2000 grit sand paper:
Scotch 218 tape 1/4″:
Scotch 218 tape 1/8″
Prep-All:
Spray Max Spot Blender:
Duplicolor Adhesion Promoter
Duplicolor Scratch Filler & Primer
DupliColor Primer Sealer:

How to: Spray Automotive Paint in your Garage with Professional Results – Complete Guide!

How to Repair & Paint a Scratched Plastic Bumper – Easy Fix!

I don’t have Patreon or ask for donations but you can support the channel with some rad gear from my store:

Follow Us:
Instagram: 6th_gear
facebook.com/6thGearGarage

Likes: 19820

Views: 1723588

Leave a Reply

  2. Kane Purdy

    You should have your own TV show that's just like this

  3. ahoorakia

    Spray can is not for big area like the whole hood ,roof ETC,you should rent a compressor and real spray gun!

    that car need a complete re spray

  4. George Murphy

    Is this video on what not to do?🎉😂😂

  5. Terence

    I would not touch the paint for about a week, make sure it's hardened, no need to rush,

  6. The King

    LOL Just paint the POS! repaint and clear….youre welcome!

  7. Alberto Rangel

    Thank you for the effort to show us your ways of doing this. Excellent video

  8. AlphaMuscle

    DOnt keep spraying with almost empty can.. its sputtering

  9. Archivaldo

    It would be the best if you were my next door neighbor I baught a Corolla but man the paint is gone it even has rust on some spots where clear coat and paint use to be I would pay you to work on my car and I would learn a thing or two along the way working on cars is hard enough but the paint is a little more complex

  10. LS4.8 Frank

    I would say nice work, but the way you inconsistently and unevenly sprayed the color coat had me cringing so bad and then you just sprayed clear over it. Not good, but you don't really care because you are flipping the car anyways so it'll be someone else's problem

Comments are closed.