I tested different methods on fixing a rusty rock chip on my BRZ.
It’s paint coat is pretty thin!
Likes: 1390
Views: 155502
Leave a Reply
Comments are closed.
I tested different methods on fixing a rusty rock chip on my BRZ.
It’s paint coat is pretty thin!
Likes: 1390
Views: 155502
Comments are closed.
Ahaha this is a hilarious way of fixing up the chip and totally what I was looking for. I think changing up the methods up a bit would be nice.
Clean up the rust spot first.
Use paint-on rust converter instead of buffing it out with Turtle wax.
Cleaning it up with isopropyl alcohol again.
Then using base coat primer (grey or black).
Lastly, instead of using gunpla paint pen, I'll be ordering the touch-up paint for my FRS (D4S Raven Black).
Seal it up with a clear coat and you're good to go.
If you had use Dr Colorchip kit you would not be able to even see the repair. I have been using it and it works really good.
No clear coat?
Thanks you solved my problem
I learned from a professional body guy that you can use a razor blade to scrape away any rust or flaking paint as well. The rubbing compound is a good idea though.
Love the tip hate the music in the background I'd rather just hear your voice. I know some people love it I guess I'm getting old
Do it the right way with a Dremel. It looked like there was still a little rust in that hole. If that’s the case it will definitely come right through the pain in no time.
Music loud. Why the fck do people add music to their videos smh 🤦🏾♂️
It’s going to rust bubble. All you did was slow it down at most
Where can you buy the pen?