[bsa_pro_ad_space id=14]
This Video will show you how to fill just a COUPLE stone chips or paint blemishes. We like to share DIY methods. SEE all the Tools in the SHOW MORE of the video description!
USA TOOLS:
Rubbing Alcohol
Lacquer Thinner
2000 Grit Sand Paper
3000 Grit Sand Paper
Spray Bottles
Dish soap
Fiber Towels
All Purpose Towels
Mothers
Paint Brushes
Carnauba Cleaner Wax
Venom
Sponges
Applicator
__________________________________________________________
____________________________________________________________
United Kingdom TOOLS:
Venom
Fiber Towels
Cleaner Wax
Mothers
Wax Applicator
Alcohol
Soap
Spray Bottles
White Towels
Lacquer Thinner
Sponges
Paint Brushes
Towels
Sand Paper
____________________________________________________________
Deutschland TOOLS
Venom
Cleaning Towels
Mothers
Microfiber
Cleaner Wax
Sand Paper
Spray bottle
Sand Paper
Alcohol
Lacquer Thinner
Soap
Brushes
Sponges
Wax Applicator
[bsa_pro_ad_space id=15]
Likes: 1034
Views: 43063
I think i might give your method a go i will use 3000 grit with a Meguiar's E7200 should be ok?
And any standard dish soap should be ok?
Hey SPC! I'm going to be doing this project on my F150 and then I'm going to nano coat it. So I can simply forego the Carnauba cleaner wax after the Mother's polishing and I'll be go to go right?
Iv got a couple of stone chips with rust in them, how do i stop the rust from spreading?
You are the best bro
magic!
Quick question from a newbie. Is the paint you are using a single stage 1K, or a 2K with activator?
Your channel is awesome and I already applied some of your knowledge! My girl and I completely rustproofed her 18 year old mazda mx-5, including the windshield seal as shown by you. We 303'd all the plastics and rubber bits-car is beginning to look really great!
I have one question from your method in this video:
Wont the carnauba wax wear off after a couple of weeks/months and the dull paint shine through again?
How do you premix paint and clear coat? Ratio?
I have a bmw with mineral white paint, all the paint touch up kit look like 2 or 3 stage so my question is, how do I apply the top coat do that when I sand it down level to the surrounding paint, the top coat (which I believe has the pearlescent quality in it) is not removed? Help!
This is a good video. I can still see the chips after you buffed it out, but that's about as good a chip repair as I've ever seen and probably as good a result as can be expected. Maybe if you get really lucky, the touch up paint will be a perfect match and the resulting repair using this method would be virtually invisible, but this is pretty damn good.