How is Hail Damage Repaired with Paintless Dent Removal
So you want to know how Hail Damage is repaired with paintless dent repair. Today I am going to show you the professional way that we take hail damage dents out from a car using PDR. There are some DIY Dent Repair methods that may work for you but most probably won’t. You may have heard of using dry ice to take dents out or heating up the dent with a hairdryer and using a can of compressed cold air and that’s gonna pop the dents out for you, maybe you can just pop them out with a plunger or suction cup. I have even heard people say they just leave it out in the hot sun and this will cause the dents to pop right out. The problem with these methods is you may run into issues with damaging the paint.
Using Paintless Dent Repair to take out the hail dents is the preferred method recommended by the vehicle manufacturers and the insurance companies.
First off you can see underneath the hood that there is a bigger dent that is out in the open. We’ve got a special PDR tool with special tips on it that we use to get on the underside of the panel and then we will likely just push up the metal.
This method of paintless dent repair you could try to do-it-yourself but if you don’t have any experience with it could be difficult because of the hand-eye coordination that is needed. We use our special PDR lights to know exactly where we are pushing the dent from underneath and we make the several small little tiny pushes pushing up every little spot.
Some people have come to me and said they tried to remove the hail dents them self and they have just caused further damage that may not be able to repair anymore with PDR. What happens is if you get in there and you push on the dent and you think you just gonna pump it out you actually bust the paint by pushing too hard or you can make little marks in the paint or in the metal from pushing too much.
See this video about DIY Dent Repair
There is your demonstration on how to fix the hail damage with paintless dent removal. If you try the DIY Dent Removal method and it just didn’t work out for you or your vehicle got hail damage and you just want the professionals to fix it for you, then give me a call here at Excel Dent Removal over in Blaine Minnesota. My phone number is 763-780-4000 or just visit me on my website at
Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449
Phone: 763-780-4000
======================================================
See the blog post about How to Remove Hail Dents using #paintlessdentrepair :
More info about #haildamagerepair :
======================================================
Share This Video about How To Repair Hail Damage Dents:
=====================================================
If you need Hail Damage Repair In Minnesota then see this video:
=====================================================
Excel Dent Removal Website:
Subscribe:
YouTube Channel:
Google+ Page:
Facebook:
Twitter:
Excel Dent Removal Blog:
Linkedin Company Page:
======================================================
How is Hail Damage Repaired with Paintless Dent Removal
-~-~~-~~~-~~-~-
Check out my new Extreme Paintless Dent Removal Video:
“Repaired a Large Dent in this Car Fender”
-~-~~-~~~-~~-~-
Likes: 701
Views: 227425
Can you repair a roof?
Just liked, video can be found now
@1:40 Did anyone notice the several Kilo's of Hash used as sound proofing? lol
I learned a lot!! The best lesson I learned is to let a professional like this guy do the work. Who has the time , the lights , tools, and shop to do this type of work without damaging paint?? I replace hail damaged roofs and homeowners are particular about their roofs, if you think they will be relaxed for a novice to work on their vehicles than I have a mountain range here in Colorado I would like to sell , includes mineral rights….
there are a ton of hail damaged cars here in Colorado where I live, i want to get into selling hail damaged services like this to make some sweet moolah , but most companies i have seen are like some roofing companies that magically appear when hail storms hit…some have been around for less than a year , anyone know of any credible companies that do PDR and do it well with good reviews in Denver?
I was successful pulling a dent that was in a large rear quarter panel using a large amount of hot water and a plunger. It only took a small amount of force to pull it out. I did have to do it a second time because I let go before the metal had cooled. No cracks. But this was mine.
This is the best PDR video, thank you for demonstrating both angles.
Cool Dude, Great Work! 🙂
Spongebob
How much would a job similar to this cost?