Get your Free New A-Z Guide To DIY Auto Body And Paint Success Manual here :
Get complete auto body and paint DOMINATION and training here:
Read the Blog Here:
Hey, it’s Tony. Thank you for watching the video and checking out the blog. Today’s blog is all about Step by Step Auto Body And Car Painting Footage for Newbies.
We’re doing a ’98 Dodge Ram project. I’m helping my godfather out which he got as a quick flip. We’re not going to do some crazy show job on it but he wanted to take out some of the large dents on this truck, paint the front and the bed. I’ll show you exactly how to do this.
Watch the series, study and learn from it. I’m pretty sure you’ll like the video. The full version is within the LearnAutoBodyAndPaint VIP Course so go check it out. Get your FREE 85-Page Auto Body And Paint Manual and learn more about DIY auto body work and how the course teaches you all these.
Enjoy the video!
Sand with 80-grit around all your body work areas before laying any kind of putty, so you can feather in your body work and bondo. Do you see how we have it scuffed all around the areas? That’s very important, this way we can blend it in.
My godfather is sanding the whole hood down with a 320-grit. Then, I’m using a straight sander on the quarter panel for a nice, flat edge. Watch how I do it on the fender crease.
I’m going to use the Warwick 980HE Spray Gun. It’s a real amazing high quality spray gun. You can check it out on the LearnAutoBodyAndPaint Shop Page.
I’ll show you my father’s trick with the mask. He puts a little toilet paper so it serves as a pre-filter. It takes out a lot of the initial heavy overspray.
One thing where a lot of newbies make a mistake is they don’t put enough clear on it. That’s why it comes out dry and orange peely. Orange peel is not enough clear, drying too quickly, improper mixture, spraying incorrectly, spraying at a too low psi.
I hope you enjoyed the series. Check out LearnAutoBodyAndPaint for more videos and don’t forget to grab your FREE 85-Page Auto Body And Paint Manual, indicate your best email and we’ll send the download link.
Check out the LearnAutoBodyAndPaint VIP Course and get access to complete step-by-step projects and exclusive access the Facebook VIP group. Please don’t forget to Like, Share and Subscribe to my videos.
Talk to you soon! Bye!
Tony
Join the LearnAutoBodyAndPaint VIP Here:
Get A 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here:
Connect on Facebook for More FREE Updates:
Connect on Google Plus:
Shop Here for Best Value High Quality Spray Guns:
Likes: 4782
Views: 324645
Can you say solvent pop?
My favorite video… Great tutorial and I have the same car…. Dodge Dakota 1997 that does need the same tuning….terrific..Loved!!!
God Bless you…
Regards
Pablo De Oliveira…From Spain
That was pretty cool the instructions and everything but, you should add the before and after to see all the difference
would a gallon of paint do for this kind of job for a 2 door honda?
Hi Tony I was wondering if you ever did a Chrome colour in some cars….???? Would that be possible to do??? I have a Rolls Royce Silver Shadow and I was wondering if I could do the bonnet in Chrome ….Best Regards mate… you are great profissional!!!
Amazing job Tony…as well a great tutorial… I was wondering if one day you could tutorial a Chrome paint only… the reason for that is because I have a Rolls and was searching for Chrome paint and could not find at all.. rather than just wrapped around the channels … Anyway… AMAZING video… God Bless you mate!
Pablo De Oliveira
Brazil
Waste of base on the primer areas should of used a darker primer and wouldn’t have to put so much paint to cover the primer areas younger guy think he knows what he’s doing you got to give credit to all the guys that’s been doing this thing for a while ?✌?
why didn't you sand the clear coat before buffing it?
Helllo there are you still spraying cars in 2018 becuse am becoming spreyer doing cars
bad ass bro.