Rebel Editor November 27, 2018 50 Comments

[bsa_pro_ad_space id=14]



In this video we will go over how you can use a drill polishing kit to remove scratches and scuff marks from your car. By using a drill you don’t have to go out and buy an expensive polisher or pay someone to do this for you. I’ll go over the cutting wool pads, polishing foam pad and the finishing foam pad that comes with this 3″ kit. I’ll also how you can sand down the scratches and than polish and remove them all super fast and easy.

Here are links to products which were used in this video:

3″ Drill Polishing Kit:
1500 Grit Sand Paper:
Soft Sanding Block:
Microfiber Towels:

Facebook:
Twitter:
Instagram:

Disclaimer:
Due to factors beyond the control of Ratchets and Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchets and Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video’s. Due to factors beyond the control of Ratchets and Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchets and Wrenches.

[bsa_pro_ad_space id=15]

Likes: 1419

Views: 38424

Leave a Reply

  1. Sirlance Nolasco

    Can you do the deep scratch one? also, How many times can you polish a car before you run through your clear coat?

  3. Jan Post

    Do your thing and inform us via your awesome demonstrations. I have learnt a lot from your videos, keep up the good work.

  4. Shariq mughal

    make both video deep clear coat and drill sanding please

  5. Jeff Kreska

    Repair the deep scratch. You can fix that headlight without sanding, just use some aluminum wheel polish and a compound wheel, not sure if it will work with the drill kit you have but you might as well try it.

  6. Adrian Small

    great job as usual thank you mate..

  9. lasegundaenmienda gmail

    touch up the edge, thanks

Comments are closed.