[bsa_pro_ad_space id=14]
Welp.. today we wanted to install the wide fenders, but we found some rust.. SO we are going to repair it properly instead of using more bondo! This will definitely last longer than bondo as far as a DIY Rust Repair!
Downforce on a FWD:
THE COMMITTED CREW:
FOLLOW ME HERE⬇️
•Instagram –
•Facebook –
•Twitter –
SEND STUFF HERE?
PO Box 57359 Coquitlam, BC, V3K 0C9
CURRENT GEAR:
Main Camera
Vlog Camera
Lens
Mic
Best Camera Bag
Tri-pod
Gorilla Pod
Music:
[bsa_pro_ad_space id=15]
Likes: 3095
Views: 45658
Weld it with the tig instead of the mig cause the tig is for more thin metal
B is for build had a similar fan set up before the sick paint booth
Why steel? So heavy should have used sheet metal….
Rubber mallet that dent out….
I have 1 main (36 inch) and 2 secondary (12 inch) fans. If you can install a 120v outlet in a new spot, you can install that fan. I don't have filters. I've never seen things flying out the back either
Come to Newfoundland
@3:40 check out chris from Bisforbuild. He did that to his paint booth/garage
why hasnt bondo sponsored you yet?!?!
Have to tack welder it can run a bead or it will make wavy like it is. Love the channel cant wait see next build and a 1j 240
coke head