In this video I am going to show you guys how you can paint your car using nothing but rattle cans, we’ll go over how to sand and fix scratches and scrapes, spray 2k primer, apply a urethane base coat and than spray 2k clear coat on top. All of that using only rattle cans.
Here are links to products which were used in this video:
220 Grit Sand Paper:
400 Grit Sand Paper:
1500 Grit Sand Paper:
Ultra Fine Grey Scotch Brite Pad:
2K Primer Gray:
BaseCoat: Search for ERA Paints + Your Car’s Paint Code on Amzn:
2K Clear Coat:
Grease and Wax Remover:
Masking Tape 1.4″ :
Sanding Block:
Tack Cloth:
Microfiber Towels:
Respirator:
Facebook:
Twitter:
Instagram:
Disclaimer:
Due to factors beyond the control of Ratchets and Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchets and Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video’s. Due to factors beyond the control of Ratchets and Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchets and Wrenches.
Likes: 22695
Views: 1601966
He talks about not starting spraying with primer or paint directly on the metal, well this is true for the paint, but the primer is mostly getting sanded down so imperfect surface spots should be easily sanded off, but always better to NOT start on the metal. As for the paint, definitely do NOT start on the metal, but a few inches off the metal, which he does correctly, but he stops in the middle of the hood, and stops pressing the nozzle stopping the spraying, then he does exactly what he said Not to do by starting spraying on the metal! Why didn't he keep going to the other end, and beyond, finger odd nozzle, stop! Start beyond the edge and all of the way beyond the edge on the other size, stop! And so on. Because he's stopping in the middle , he is creating the same problem of blotching up the job as if he started initially spraying directly on the metal edge. WTF
2:06 shots fired
Good to have a link for the elbow grease
No one's gonna mention how he just put a spray can right on the hood where the paints good. Smh
Dude you are the best at explaining body work on YouTube. Period.
You are painting my first truck witch I regret selling
Link to "BaseCoat: Search for ERA Paints + Your Car's Paint Code on Amzn" is dead …..
You really are very good at explaining the process without wasting loads of time talking – thanks
Dishwashing is for ladies? Lol… for one that's not always the case and your not gonna be washing dishes with it anyways. Two, your hands aren't gonna melt if you use it.
this guy has said some beyond questionable things in this video jesus christ i'm surprised he has this big a fan base smfh