You can’t expect a perfect paint job unless you have the proper painting setup. In this video I detail a basic paint setup that you can do in your own home garage to deliver very clean air for all your air tools so you can have the most outstanding garage paint jobs.
🟢🟢CHECK OUT OUR ONLINE STORE🟢🟢
🔺🔺SHOP ALL Exclusive Products found on our YouTube channel for your project! 🔺🔺
Products in this video:
Air Cooling System 1 inch version, 3/4 in video:
Complete Filtration System:
2nd Filter Option:
Pipe Cutter:
Hose Reel:
Flex Hose:
Air Splitter:
Eastwood 30/60 compressor:
Other common products used in other videos.
EZ Edger:
10mm Trim Tape:
Foam Tape:
3M Plastic:
FC720 Gallon:
FC720 Quart:
FC710: Gallon:
FC710 Quart:
3M Performance Spray Gun:
DV1 Clearcoat Gun:
DV1 Basecoat Gun:
Clearcoat:
Blending Additive:
Degreaser:
Astro Sunlight:
Paint Gun Cleaning Kit:
Gloves:
Gun Cleaner:
Water Cleaner:
3M Soft Saning Sponge:
Prep Cleaner:
Tolecut Sanding Dirt Nibs:
Griots Garage Polisher:
Milwaukee Mini Buffer:
Likes: 1648
Views: 52528
Would dry spots in metallics possibly be caused by not having a system like this in place?
A good reminder that I need to do something like this in my garage. This is nice, clean install!
FYI Most home / cheap pipe cutters also has built in de-burring tool to flip out on the back
Putting a condenser from a car air conditioner between the pump and tank helps cool the air going into the tank . Make sure you put the condenser in front of the pump fan if it has one or install an electric fan in front of the condenser so cool air can be pulled through the condenser. It has cut way down on draining my tank regularly. Now it's every few days vs every day.
Good job guy
There is a video of a guy that built his air compressor and he used a copper coil in a bucket of water to cool the air… It worked out really well by shedding 150° according to his thermometer… check it out, his channel name Fix206
Thanks Brian for sharing that