You can’t expect a perfect paint job unless you have the proper painting setup. In this video I detail a basic paint setup that you can do in your own home garage to deliver very clean air for all your air tools so you can have the most outstanding garage paint jobs.
🟢🟢CHECK OUT OUR ONLINE STORE🟢🟢
🔺🔺SHOP ALL Exclusive Products found on our YouTube channel for your project! 🔺🔺
Products in this video:
Air Cooling System 1 inch version, 3/4 in video:
Complete Filtration System:
2nd Filter Option:
Pipe Cutter:
Hose Reel:
Flex Hose:
Air Splitter:
Eastwood 30/60 compressor:
Other common products used in other videos.
EZ Edger:
10mm Trim Tape:
Foam Tape:
3M Plastic:
FC720 Gallon:
FC720 Quart:
FC710: Gallon:
FC710 Quart:
3M Performance Spray Gun:
DV1 Clearcoat Gun:
DV1 Basecoat Gun:
Clearcoat:
Blending Additive:
Degreaser:
Astro Sunlight:
Paint Gun Cleaning Kit:
Gloves:
Gun Cleaner:
Water Cleaner:
3M Soft Saning Sponge:
Prep Cleaner:
Tolecut Sanding Dirt Nibs:
Griots Garage Polisher:
Milwaukee Mini Buffer:
Likes: 1648
Views: 52528
Great job! Don’t overthink it, it’s just air.
Great set up Brian I’d love a garage at home like that 🙂 awesome buddy 👍👍👍
This is one of the best channels on YouTube 😮
Perfect timing! Building this right now actually. I also have a splitter like you and plan to buy a hose that is 100% free from silicone for the paint shop. Silicone is baaad for painting 😂
Thx for all your tutorials.
Kind regards
Anders
Sweden
I like pancakes.
Wouldn't it be easier and cheaper to use a high pass turbine sprayer setup for a home garage?
PVC, PVC!!! 😊
What hose do you have dedicated to spraying? Size, type, length?
What are your thoughts on those turbine HVLP paint systems that warm the air and spray at even lower hvlp pressure? I know lots of furniture refinishers that use them and love them but never met anyone shooting cars using them. Curious if you or anyone here has. This is like the opposite concept of wanting cooler dry air versus warmer air,
Brian you are the best man💯
I just purchased the dv1 and for the dv1-b plus air cap it says 22psi but would you still be able to spray at 15psi since only difference is that its water based compatible?