Paintless Dent Repair for beginners by a first time a DIY guy. It looks so easy when all the PDR pros do it on youtube, so I wanted to try it out on my car. What did I have to lose? Paintless dent repair is where you adjust the sheet metal on your car to be flat again. If there is a low spot pull it out. If there is a high spot, tap it down. When it’s smooth again, you are done! You don’t have to be an auto body pro to pop out a door ding. Don’t be afraid to try this on your car, unless it’s precious. For me, it’s all about learning a new skill and having a little better car in the end. I’m stoked that I did this pops a dent kit. I got a couple door dings and dents out since filming this. Take your time, you can get great results if you pay attention to what you are doing. This is a great way to repair hail damage too. The kit I got has glue tabs, a hot glue gun, glue sticks, a slide hammer, a rubber hammer, a t-handle puller, a bridge puller, and a dent lifter. I also suggest a heat gun to reuse the glue on the tabs since it just needs to get hot to melt again and is faster than the glue gun.
Get your own dent repair kit with these affiliate links.
PDR kit :
Heat gun :
Buffer :
Not shown in video, but suggested by other commenters –
PDR Rods –
Dent Magic PDR kit –
PDR LED Stripe line board –
PDR kit with Rods –
Suction Cup Puller –
For something more interesting, try listening to audio books. I love having a good book read to me while I work or drive. They sure beat top 40 radio these days!! Here’s a link to a free month of Audible. Enjoy!!! Prime members get an even better deal! –
You ever have groceries delivered? Try Amazon Fresh and let the groceries come to you. –
Likes: 1041
Views: 226139
How long would you say the whole process took?
Spray a cloth, NOT the bodywork – what a waste! Clean properly before even considering tapping down the metal.
How to waste solvent by spraying half the bottle down the panel – get a cloth you twat!
Now there's dirt, glue and hammer marks! Lol.
Pops a dent should come with more tabs. Paint stick?
At least you’re having a crack at it! Don’t listen to the naysayers: it looks a lot better than it did . Isopropyl alcohol nails the glue residue and you can get it any grocery store.
What’s that black smudge??🤷🏻♂️🤔😱👌it’s still on the metal….how do you get that off?
Are you using alcohol cause you spending too much time rubbing out the glue
뭘 알고나 망치질 하는건가?
글루도 뗄 줄 모르는데..
막무가내 다이는
오히려 차를 망칩니다.
Use black glue
How much was it for that kit that you're describing into the beginning of your video