This video covers:
▶ How to remove front steering knuckle
▶ How to press out lower ball joint
▶ How to press in lower ball joint
▶ How to inspect ball joints
In this episode, I work on replacing my lower ball joints. I go through the steps of how to remove the steering knuckle, hammer out the old ball joint, and press in the new ball joint. I also talk about how to inspect your ball joints and new parts before installation. I perform the installation using a socket and hammer to punch the old ball joint out and then using the ball joint press I borrowed to press the new ball joint in.
▶ How to Replace Upper Ball Joints? Check out here:
Any questions or suggestions? Comment, Like, Subscribe and share your idea with me!
▶ Follow me on Instagram!:
Song: Ikson – Paradise
Music by
#LowerBallJoints #DIYCarRepair #Rebuild #EFCIVIC #CarMods #HondaCivic #VintageCIVIC #Civic #D16Y8 #CivicSi #VintageCar #CarRepair #rebuild #cars #carmods #hondatech #honda #edcivic #engineerbuild #budgetbuild #projectcar #diyproject #diymechanic #diycarproject #carrestoration #restoration #1990civic #hondalover #front #steeringknuckle #suspension #OEMTOOLS #balljointpress
Likes: 6
Views: 30
Why not just get OEM Honda balljoints to be safe ? The quality of metal and rubber are better than aftermarket ! Rockauto "quality control" is not good…. they have gotten to big now to care about the quality of parts they are selling. They have to rely on the companies.