Welcome to the #1 Guide to Repair Holes or Cracks on your vehicle. The lessons in this guide if performed properly will last a lifetime and will give your vehicle the appearance of no previous damage! Click to start learning!

🟢🟢CHECK OUT OUR ONLINE STORE🟢🟢

🔺🔺SHOP ALL Exclusive Products found on our YouTube channel for your project! 🔺🔺

Products in video:

Fusor 100 EZ:

Fusor Mixing Tips:

Fusor Dispensing Gun:

Eastwood Primer Part A:
Eastwood Primer Part B:
Eastwood Reducer (if needed):

3M Performance Spray Gun Kit:

3M Xtract Dust Extractor:

3M Xtract Sander Electric:

3M Blocking Vacuum Block Set:

Interface Pad:

Milwauuee Rotary Tool:

Rotary Attachments:

Mixing Board Sheets:

Glaze Putty:

Bondo Spreaders:

Heat Gun:

Sandpaper:

P180 Blocking Paper:

Maxfilm Ultra Premium 6 inch Sanding Disc, P80, 5 Holes, Hook & Loop:

MaxFilm Ultra Premium 6 inch Sanding Discs, P180, 15 Holes, Hook & Loop, 523-0180, 50 discs

MaxFilm Ultra Premium 6 inch Sanding Discs, P320, 15 Holes, Hook & Loop, 523-0320, 50 discs

MaxFilm Ultra Premium 6 inch Sanding Discs, P400, 15 Holes, Hook & Loop, 523-0400, 50 discs

MaxFilm Ultra Premium 6 inch Sanding Discs, P600, 15 Holes, Hook & Loop, 523-0600, 50 discs

Pre Painting Prep Cleaner:

other products used in my videos:

Clear for at Home or Production Shops:

FC720 Gallon:

FC720 Quart:

FC710: Gallon:

FC710 Quart:

Like 90 supplies:

Other Supplies:
Blending Additive:

Degreaser:

Astro Sunlight:

Paint Gun Cleaning Kit:

Gloves:

Gun Cleaner:

Water Cleaner:

3M Soft Saning Sponge:

Prep Cleaner:

Tolecut Sanding Dirt Nibs:

Griots Garage Polisher:

Milwaukee Mini Buffer:

Likes: 920

Views: 21973

Leave a Reply

  1. Lloyd Kratka

    I myself call that a counter sink

  2. john dutton

    great video definitely will help on my integra project with the new bumper lip the last owner used rivets so i have a few holes to fill . how would you recommend installing the new lip ? double sided tape ? or is there something better ?

  3. Speedokote refinish network

    Amazing repair. I gota get me one of those vacuum sanding systems.

  4. Pete R

    You can also countersink the holes.

  5. Farjan Khan

    I do the same thing, I am very inspired by you, can I work with you?

Comments are closed.