Replacing a front wishbone or control arm on a BMW 3 series E46. A 2001 BMW 320 in this video. To ask questions about this job and get news about upcoming videos, join us over at www.diycarguide.com today.
Likes: 1312
Views: 99129
Leave a Reply
Comments are closed.
Very clear instructions. Thanks. What are the symptoms of a worm wishbone?
Fantastic video well done mate very helpful
Watched several of these vids before install. This was the best. Short and to the point, with tips other vids didn't offer.
i've read on some forum that you have to torque the bushings when the car is under its own weight, is that true? or when you jacked up the wishbone to final torque it its the same thing as tightening it under the own weight of the car
Brilliant job. Thanks for sharing.
Btw… Where do you usually jack up the car and put it on the jack stands?
Thanks very much, excellent
Thank you for the suggestion about pin spinning. both sides were like that. M3 was much harder to do due to small space.
Checkout my channel. Iām trying to build my sub count! Thanks!
This is the only guide I've seen where someone got to the 21mm nut from the top. On my 330 you can even see the hole in the engine mount for access and no one seems to notice. Top job.
Great informative video did mine yesterday no real problems thanks to your video.šš