How to correctly repair, solder and protect an automotive wiring harness or wire, using the Power Probe Micro Torch.
Likes: 1181
Views: 325683
Leave a Reply
Comments are closed.
How to correctly repair, solder and protect an automotive wiring harness or wire, using the Power Probe Micro Torch.
Likes: 1181
Views: 325683
Comments are closed.
Bought the kit but can you advice where to find the soldering guideline pdf? thanks
Can you use larger gage for smaller gage? like use 14 gauge for 16 gage?
Corrosion does not affect copper. And calling that a good soldered connection 2:46?
wires should be crimped not soldered. soldering them make wires brittle. pro wiring harness have no solder at all. factories used to solder and have failure all the time.
would have been better with electrical silicone grease applied to the wires before heating heat shink.
Doing dabs with this same shitty china made torch, it sucks. For the love of your car, and your fingertips, buy a real electric iron. Please watch a different video.
You should never connect copper wires with aluminum ones. Within time galvanic corrosion will destroy the connection
I agree with this method of hooking two wires together rather than just soldering them side by side excellent advice thanks
i need this!!!!
Good vid, but it's SOLDER, not SODDER