Power door locks are prone to failures due to electrical interruptions, corrosion, broken wires or blown fuses. Find out why a lack of any movement in door locks …
Likes: 815
Views: 650047
Leave a Reply
Comments are closed.
Power door locks are prone to failures due to electrical interruptions, corrosion, broken wires or blown fuses. Find out why a lack of any movement in door locks …
Likes: 815
Views: 650047
Comments are closed.
great vid.
very good explanation ! thank you
What if the key and switch only control the driver's side and the opposite side in the back
I have central locking only have key not remote, I unlock the drivers door, and it relocks straight away, I have to hold the handle up to get into car. then when I close the door it locks again. If I unlock the car from the other side, no issues works fine till I open then close drivers side door and it locks again?
My Honda Accord 1999
Manual key opens only Driverside and rear of diverside but the passenger side front and rear both not working , so i should check the actuators of those sides which are not functioning or the Main at the driver side
my door lock remote works to lock the car but the remote won't unlock the doors anymore?
When I press the button on the phob the lock lights come on but nothing happens D:
Jim Griffiths 1962pjb hey man my driver side door on my Acura will have similar issues. The power lock button works when I press it it will only lock the driver door and sometimes when I press it to lock and unlock sometimes it will work on the first press but when i flick it back and forth the other doors slowly die out and stop working. If I stick my key in my driver door usually it will lock or unlock all doors but now it’s only unlocking the driver door. It’s like the it’s loosening power it I flick it a couple of times.
On the last option, what if is viceversa? my remote fob unlocks/locks but neither switch works inside my truck
My 2012 avalon will open from key fob but won`t lock back .My centeral power button is also not locking all the locks or itself .So in order to lock my car i have to manually lock each door lock which sucks help anyone like you said the primary power is faulty.Is this a really expensive job to do ?