Rebel Editor January 26, 2021 38 Comments



OUR BUDGET BUILD IS ALMOST COMPLETE!!!! THE INTERIOR IS LOOKING GREAT

Join – www.youtube.com/builtofficial/join
www.builtofficial.com
Instagram –
Tik Tok – @builtofficial

Likes: 1985

Views: 37343

Leave a Reply

  1. Lindomar Castilho coelho

    ✌🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👍👍👍👍👍👍

  2. DavGo

    Great job. I learned a couple tricks from my good friend who use to do Automotive interiors. For door panels, you can get headliner material cause it has some cushion, and glue that to the back of the synthetic leather then glue them to the Hardboard. Also, you can put plastic drop cloth, cut to size as a vapor barrier to the inside door opening so the hardboard doesn’t turn to mush. As well as adding some Jute padding behind the hard board to help with insulation or use dynamat. For the “A” pillars, try going to junkyard and getting them from some random car and test fit to the ‘Rolla. Paint them or wrap them in suede. How to install Headliner without removing the windshield. Here’s an idea, use the hard board, cut contour of roof, then to 3 to 4 panels and wrap them. To install them or hold them down, use heavy duty Velcro. Hope this helps out ! 👍👍

  4. Stuart Matthews

    You should hit up Sprayway customs for that dashboard – he is a master at rescuing them

  6. NightCrisis

    use the black on the headliner too

  7. moriad02

    Get a black hardware kit of amazon for like 15$, that way the door panel bolts would flow more.

  8. jesse Simmons

    Stick a bama flag on the headliner. Cotton flag polyester melts. Just a suggestion I know it dont match but does it have too?

  9. Ryan West

    For the headliner: find a cool thin blanket or sheet to re-cover it with

  10. Antonio Hall

    Reupholster the head liner with fabric and the super 90, see how that goes?

Comments are closed.